At any point you may enter a question mark '?' for help.任何时候可以打?取得帮助 Use ctrl-c to abort configuration dialog at any prompt.按Ctrl-C可以取消并退出 Default settings are in square brackets '[]'.默认参数在[]中
Continue with configuration dialog? [yes/no]: y继续交互配置吗？回答：y Enter IP address: 10.1.1.249ip地址 Enter IP netmask: 255.255.255.0子网掩码 Would you like to enter a default gateway address? [yes]: y设置默认网关？y IP address of default gateway: 10.1.1.254默认网关 Enter host name [3548_9A]:
The enable secret is a one-way cryptographic secret used instead of the enable password when it exists.
Enter enable secret: _password输入超级用户密码
Would you like to configure a Telnet password? [yes]: y Enter Telnet password: _password输入telnet密码 Would you like to enable as a cluster command switch? [yes/no]: n集群模式？n
The following configuration command script was created:已建立以下配置信息
ip subnet-zero interface VLAN1 ip address 10.1.1.249 255.255.255.0 ip default-gateway 10.1.1.254 enable secret 5 $1$biZ3$AOLb9cMTtBwMtGB9lyBzr. line vty 0 15 password _domainwlzx snmp community private rw snmp community public ro ! end
Use this configuration? [yes/no]:使用该配置信息吗? y
修改配置：
禁止通过snmp管理： 3548>enable password: 3548#config term 3548(config)#no snmp community private 3548(config)#no snmp community public
精品推荐