Explicit Route: 10.10.12.2 10.10.20.2
Record Route: NONE
Tspec: ave rate=200 kbits, burst=1000 bytes, peak rate=200 kbits
RSVP Resv Info:
--More-- Record Route: NONE
Fspec: ave rate=200 kbits, burst=1000 bytes, peak rate=Inf
History:
Tunnel:
Time since created: 2 hours, 10 minutes
Time since path change: 2 minutes, 49 seconds
Current LSP:
Uptime: 2 minutes, 49 seconds
Prior LSP:
ID: path option 1 [257]
Removal Trigger: path verification failed
Name: R1_t2 (Tunnel2) Destination: 10.10.20.2
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type dynamic (Basis for Setup, path weight 2)
Config Parameters:
Bandwidth: 300 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: disabled LockDown: disabled Loadshare: 300 bw-based
auto-bw: disabled
--More--
InLabel : -
OutLabel : POS4/0/0, 25
RSVP Signalling Info:
Src 10.10.10.1, Dst 10.10.20.2, Tun_Id 2, Tun_Instance 283
RSVP Path Info:
My Address: 10.10.10.1
Explicit Route: 10.10.13.3 10.10.23.3 10.10.23.2 10.10.20.2
Record Route: NONE
Tspec: ave rate=300 kbits, burst=1000 bytes, peak rate=300 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=300 kbits, burst=1000 bytes, peak rate=Inf
History:
Tunnel:
Time since created: 2 hours, 10 minutes
Time since path change: 5 minutes, 15 seconds
Current LSP:
Uptime: 5 minutes, 15 seconds
Prior LSP:
ID: path option 1 [282]
Removal Trigger: path error
R1# sh ip bgp ip injter mp mpls f
Local Outgoing Prefix Bytes tag Outgoing Next Hop
tag tag or VC or Tunnel Id switched interface
16 Untagged 222.222.222.2/32 0 Se4/1/3 point2point
17 Untagged 10.10.12.2/32 0 Mu1 point2point
18 Pop tag 10.10.33.0/24 0 PO4/0/0 point2point
上一篇:某项目的CISCO产品测试报告之实验一、设备接口测试
下一篇:某项目的CISCO产品测试报告之实验四、高可用性测试
|
精品推荐