QoS策略和标记 /Catalyst 4000 Supervisor Engine 3

 ! enable qos
 qos
 ! define traffic class to be policed
 class-map match-all cl_test2
 match ip precedence 3 4
 ! define QoS policy, attach policer to traffic class
 policy-map po_test2
 class cl_test2
 ! per-interface policer is defined inside the policy map
 police 512k 1000 conform-action transmit exceed-action drop
 interface FastEthernet5/14
 switchport
 ! set port to trust DSCP - need this to be able to match to incoming IP precedence
 qos trust dscp
 ! switch to port-based qos mode
 no qos vlan-based
 ! apply QoS policy to an interface
 service-policy input po_test2
 
用于以 下命令监控策略操作：

 Yoda#show policy-map interface FastEthernet5/14
 FastEthernet5/14
 service-policy input: po_test2
 class-map: cl_test2 (match-all)
 7400026 packets
 match: ip precedence 3 4
 police: Per-interface
 Conform: 1166067574 bytes Exceed: 5268602114 bytes
 class-map: class-default (match-any)
 13312 packets
 match: any
 13312 packets
 Yoda#show policy-map interface FastEthernet5/14
 FastEthernet5/14
 service-policy input: po_test2
 class-map: cl_test2 (match-all)
 7400138 packets
 match: ip precedence 3 4
 police: Per-interface
 Conform: 1166088574 bytes Exceed: 5268693114 bytes
 class-map: class-default (match-any)
 13312 packets
 match: any
 13312 packets
 
计数器在类 映射附近数配比到对应的组的信息包的数量。

意识到以下实施特定考虑：

每种类信息包计数器不单个接口。 即它计数 匹配组在此组在服务策略之内其中是适用的所有接口的之中所有信 息包。

策略不维护信息包计数器， 只有支持字节计数器。

上一页 [1] [2] [3] [4] [5] [6] 下一页

复制本页网址和标题，发送给你QQ/Msn的好友一起分享

上一篇:Catalyst 2948G-L3配置样例（全设备配置之三-3.1）

下一篇:Cisco COMET Solutions Speed Optical Networks Toward the Future