 QQRead.com 推出数据恢复指南教程 数据恢复指南教程 数据恢复故障解析 常用数据恢复方案 硬盘数据恢复教程 数据保护方法 数据恢复软件 专业数据恢复服务指南
V.35 Interface Crossover Cable
This cable is used to connect two LS2020 switches via their V.35 fantail interfaces, or to connect a V.35 fantail to an external V.35 DTE device.
This cable is available from Cisco Systems. For ordering purposes, use the appropriate order number from the table below. Manufacturing No. Length Order No.
72-0997-01
8 feet
LS-CAB-V35-TT8=
72-0994-01
30 feet
LS-CAB-V35-TT30=
72-0995-01
50 feet
LS-CAB-V35-TT50=
72-0996-01
100 feet
LS-CAB-V35-TT100=
Figure 3-10 is a signal diagram for the V.35 fantail crossover cable.
Figure 3-10: V.35 Crossover Cable Signal Diagram
Circuit Emulation Access Card (CEMAC) Connectors and Cables
Figure 3-11 shows the CEMAC card and its associated data cable. To make a more secure connection, unscrew the top mounting screw (shown as "1" in the figure) in the connector retention bracket and reposition it in the connector (as shown by "2" in the figure). Next, tighten down the mounting screw to attach the data cable to the CEMAC card securely (as shown by "3" in the figure). Finally, secure the cable to the CEMAC bulkhead connector with the Velcro strip.
Figure 3-11: CEMAC Access Card and Data Cable Connection
Table 3-1 shows the pinout assignments of the CEMAC access card connector.
Table 3-1: CEMAC Bulkhead | 
精品推荐