当前位置：清风网络学院 → 网络技术 → Cisco网络 → Catalyst 2948G-L3配置样例（全设备配置之二）


	精品推荐


特别推荐


热点TOP10

·思科Catalyst交换机密码恢复妙招

·如何设置思科模拟器中pc的ip地址?

·Cisco VPN 客户端

·Cisco图标

·[认证宝典]CISCO实验模拟器完全攻略

·SSH在Cisco设备上设置实例

·hp open view与nortel optivity,cisco work的区别

·使用Cisco Network Assistant实现快速配置

·cisco 命令手册--精选文章

·Cisco Catalyst 4506双机热备配置

Catalyst 2948G-L3配置样例（全设备配置之二）

日期：2008年5月28日作者：查看:[大字体中字体小字体]

spanning-tree portfast ! interface FastEthernet0/6 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/7 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/8 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/9 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/12 switchport access vlan 100 spanning-tree portfast ! interface GigabitEthernet0/1 no negotiation auto port group 1 switchport mode trunk ! interface GigabitEthernet0/2 no negotiation auto port group 1 switchport mode trunk ! interface VLAN1 ip address 10.1.1.2 255.255.255.0 no ip directed-broadcast no ip route-cache ! ip default-gateway 10.1.1.1 ! line con 0 transport input none stopbits 1 line vty 0 4 password secret login line vty 5 15 login ! end 3512XL#

Catalyst 2924XL 配置

2924XL#show running-config 
 Building configuration...
 
 Current configuration:
 !
 ! Last configuration change at 12:58:30 PST Thu Jun 22 2000
 ! NVRAM config last updated at 12:58:40 PST Thu Jun 22 2000
 !
 version 12.0
 no service pad
 service timestamps debug datetime msec localtime
 service timestamps log datetime msec localtime
 no service password-encryption
 !
 hostname 2924XL
 !
 no logging console
 enable password verysecret
 !
 !
 !
 !
 !
 clock timezone PST -8
 !
 ip subnet-zero
 !
 !
 !
 interface FastEthernet0/1
  switchport access vlan 30
  spanning-tree portfast
 !
 interface FastEthernet0/2
  switchport access vlan 30
  spanning-tree portfast
 !
 interface FastEthernet0/3
  switchport access vlan 30
  spanning-tree portfast
 !
 interface FastEthernet0/4
  switchport access vlan 30
  spanning-tree portfast
 !
 interface FastEthernet0/5
  switchport access vlan 30
  spanning-tree portfast
 !         
 interface FastEthernet0/6
  switchport access vlan 30
  spanning-tree portfast
 !
 interface FastEthernet0/7
  switchport access vlan 30
  spanning-tree portfast
 !
 interface FastEthernet0/8
  switchport access vlan 30
  spanning-tree portfast
 !
 interface FastEthernet0/9
  switchport access vlan 30


            
               
                上一页 [1] [2] [3] [4] [5] [6] [7] [8] 下一页 
              
            
            

            

            
            

            

            上一篇:Catalyst 2948G-L3配置样例（全设备配置之三-3.1）

            

            下一篇:Catalyst 2948G-L3配置样例（全设备配置之一）

·如何在交换机上配置VLAN

·设好eMule电驴两项关键配置提高下载速度

·第一章路由器基本操作和简单配置命令-如何登录进入路由器

·路由器配置中打开debug开关方法

·路由网络地址转换NAT配置实例

	\| 帮助(？) \| 版权声明 \| 友情连接 \| 关于我们 \| 信息发布
Copyright 2007 www.vipcn.net All Rights Reserved.	鄂ICP备05000083号Powered by:viphot