当前位置：清风网络学院 → 网络技术 → Cisco网络 → Catalyst 2948G-L3配置样例（全设备配置之二）


	精品推荐


特别推荐


热点TOP10

·思科Catalyst交换机密码恢复妙招

·如何设置思科模拟器中pc的ip地址?

·Cisco VPN 客户端

·Cisco图标

·[认证宝典]CISCO实验模拟器完全攻略

·SSH在Cisco设备上设置实例

·hp open view与nortel optivity,cisco work的区别

·使用Cisco Network Assistant实现快速配置

·cisco 命令手册--精选文章

·Cisco Catalyst 4506双机热备配置

Catalyst 2948G-L3配置样例（全设备配置之二）

日期：2008年5月28日作者：查看:[大字体中字体小字体]

bridge-group 200 spanning-disabled ! interface FastEthernet44 no ip address no ip directed-broadcast ! interface FastEthernet44.1 encapsulation isl 1 no ip redirects no ip directed-broadcast bridge-group 1 ! interface FastEthernet44.30 encapsulation isl 30 ip address 10.30.30.1 255.255.255.0 no ip redirects no ip directed-broadcast ! interface FastEthernet45 no ip address no ip directed-broadcast channel-group 2 ! interface FastEthernet46 no ip address no ip directed-broadcast channel-group 2 ! interface FastEthernet47 no ip address no ip directed-broadcast channel-group 2 ! interface FastEthernet48 no ip address no ip directed-broadcast channel-group 2 ! interface GigabitEthernet49 no ip address no ip directed-broadcast no negotiation auto channel-group 1 ! interface GigabitEthernet50 no ip address no ip directed-broadcast no negotiation auto channel-group 1 ! interface BVI1 ip address 10.1.1.1 255.255.255.0 no ip directed-broadcast no ip route-cache cef ! interface BVI200 ip address 10.200.200.1 255.255.255.0 no ip directed-broadcast no ip route-cache cef ! ip classless ! bridge 1 protocol ieee bridge 1 route ip bridge 200 protocol ieee bridge 200 route ip ! line con 0 transport input none line aux 0 line vty 0 4 password secret login ! end 2948G-L3#

Catalyst 3512XL 配置

3512XL#show running-config 
 Building configuration...
 
 Current configuration:
 !
 ! Last configuration change at 12:52:31 PST Thu Jun 22 2000
 ! NVRAM config last updated at 12:52:32 PST Thu Jun 22 2000
 !
 version 12.0
 no service pad
 service timestamps debug datetime msec localtime
 service timestamps log datetime msec localtime
 no service password-encryption
 !
 hostname 3512XL
 !
 no logging console
 enable password verysecret
 !
 !
 !
 !
 !
 clock timezone PST -8
 !
 ip subnet-zero
 !
 !
 !
 interface FastEthernet0/1
  switchport access vlan 100
  spanning-tree portfast
 !
 interface FastEthernet0/2
  switchport access vlan 100
  spanning-tree portfast
 !
 interface FastEthernet0/3
  switchport access vlan 100
  spanning-tree portfast
 !
 interface FastEthernet0/4
  switchport access vlan 100
  spanning-tree portfast
 !
 interface FastEthernet0/5
  switchport access vlan 100


            
               
                上一页 [1] [2] [3] [4] [5] [6] [7] [8] 下一页 
              
            
            

            

            
            

            

            上一篇:Catalyst 2948G-L3配置样例（全设备配置之三-3.1）

            

            下一篇:Catalyst 2948G-L3配置样例（全设备配置之一）

·如何在交换机上配置VLAN

·设好eMule电驴两项关键配置提高下载速度

·第一章路由器基本操作和简单配置命令-如何登录进入路由器

·路由器配置中打开debug开关方法

·路由网络地址转换NAT配置实例

	\| 帮助(？) \| 版权声明 \| 友情连接 \| 关于我们 \| 信息发布
Copyright 2007 www.viphot.com All Rights Reserved.	鄂ICP备05000083号Powered by:viphot